Home / Equipment / Receiver Power / Steve Burns Regulator Setup

Steve Burns Regulator Setup

This is the way Steve is powering his receivers now. The items used in this example are a 2s Lipo 360mAh, a safe switch which was purchased from Hyperflight in the UK and a Castle Creations BEC.

The lipo can be left connected as the power consumed by the switch is so small. Also the switch has a built in charge port.

At some point I do intend to fit a extension lead or fuselage mounted socket to the balance connector to make life easier when it comes to battery maintenance.

Link for the safe switch (Unfortunately no longer available)



About Alan Flockhart

Check Also

Mike Seale’s Version of the regulator

Here’s my example of the voltage regulator design originally published by George Shering.  I’ve made ...